100％防水

無貫通型ソーラー設置ソリューションは屋根保護を最優先とし、建物の完全性を守ると同時に、長年にわたり太陽光システムの安定稼働を保証します。

迅速な施工

ベース部材は工場にて事前組立済みで、即時使用可能です。熱融着施工後、太陽光パネルをスピーディーに設置でき、現場施工時間を短縮。設置効率を40% 向上させます。

高耐風性能

優れた耐風性を備えたソーラーマウントシステムです。SGS 試験によると、膜材一体型レールベースの耐風荷重は4000Nを実現します。

高い適用性

あらゆる種類・仕様の太陽光パネルに対応し、軽量フレキシブルパネル向けに特別最適化されています。取り付け角度のカスタマイズが可能で、南向き設置や東西並び設置の要件にも対応します。

NO PERFORATION SOLUTIONS

Flat Installation Bracket

Type: V-NP-F

V-NP-F solar bracket system specifically designed for TPO/PVC/EVA membrane roofs. It adopts the same hot-melt welding process as the original roof construction, without drilling holes or ballasting.
This effectively eliminates potential water leakage risks and ensures the long-term safety of the entire PV system.
After the integrated Membrane-Rail base is welded onto the roof, the solar panel is directly fastened to the base with clamps.
Suitable for all types and specifications of solar panels.

V-NP-F is compatible with every type of commercial roofing, and can be used on mechanically attached, fully adhered and ballasted roof systems.

NO PERFORATION SOLUTIONS

South Tilt Installation Bracket

Type: V-NP-S

Building on the V-NP-F model, we add front and rear columns as well as diagonal braces to the integrated base. This design maintains the PV panels at a 10° south-facing tilt, which effectively boosts power generation while reducing dust accumulation on the panel surfaces.
It adopts the same hot-melt welding process as the original roof construction, without drilling holes or ballasting.
This effectively eliminates potential water leakage risks and ensures the long-term safety of the entire PV system.
After the integrated Membrane-Rail base is welded onto the roof, the solar panel is directly fastened to the base with clamps.
Suitable for all types and specifications of solar panels.

V-NP-S is compatible with every type of commercial roofing, and can be used on mechanically attached, fully adhered and ballasted roof systems.

NO PERFORATION SOLUTIONS

East-West Installation Bracket

Type: V-NP-EW

Building on the V-NP-F model, we add angle-adjusting components to the integrated base, maintaining the PV modules at a 10° east-west tilt. This design not only significantly enhances wind resistance but also ensures stable power output throughout the generation period.
It adopts the same hot-melt welding process as the original roof construction, without drilling holes or ballasting.
This effectively eliminates potential water leakage risks and ensures the long-term safety of the entire PV system.
After the integrated Membrane-Rail base is welded onto the roof, the solar panel is directly fastened to the base with clamps.
Suitable for all types and specifications of solar panels.

V-NP-EW is compatible with every type of commercial roofing, and can be used on mechanically attached, fully adhered and ballasted roof systems.

NO PERFORATION SOLUTIONS

Flexible Solar Panels Bracket

Type: V-NP-FP

Tailored specifically for lightweight flexible panels, this design accommodates the installation of flexible panels with lengths ranging from 1000mm to 2500mm. By extending the base and increasing its quantity, we provide robust bottom support for flexible panels, eliminating the risk of cell microcracks caused by panel sagging.
It adopts the same hot-melt welding process as the original roof construction, without drilling holes or ballasting.
This effectively eliminates potential water leakage risks and ensures the long-term safety of the entire PV system.
After the integrated Membrane-Rail base is welded onto the roof, the solar panel is directly fastened to the base with clamps.
Suitable for all types and specifications of solar panels.

V-NP-FP is designed for compatibility with all types of commercial roofs and is suitable for mechanically attached, fully adhered, and ballasted roof systems.